Daily capacity up to 500 L in 8 hours
Wastewater treatment
Laboratory wastewater treatment system up to 500 L/day
BK-SFS500
A laboratory wastewater treatment system combining pH adjustment, precipitation, oxidation, disinfection and filtration to address different parts of the pollutant load. Reagent dosing is coordinated with liquid-level monitoring, while aeration and microelectrolysis complement the treatment stages in the reference configuration. Water passes through successive operations before collection or onward transfer. Process selection and operating conditions are based on wastewater analysis, daily volume and the relevant contaminants, allowing treatment results to be assessed against the requirements of the intended destination.
Automatic pH, level and reagent control
Aeration, microelectrolysis and optional photocatalysis
Technical data
Reference configuration
The final configuration depends on daily flow, effluent composition, contaminant load, reagents and discharge requirements.
Specifications by model
Each column identifies a model or configuration. Shared values are marked.
| Parameter | BK-SFS500 |
|---|---|
| Treated water volume | 500 L/day (8 h) |
| pH measurement range | 0–14 |
| pH adjustment range | 6–9 |
| pH resolution | 0.01 pH |
| pH accuracy | ±0.02 pH |
| Power supply | AC 220 V, 50/60 Hz |
| Optional power supply | AC 110 V, 50/60 Hz |
| Packing dimensions — equipment | 1500 × 710 × 1415 mm |
| Packing dimensions — accessories | 515 × 515 × 1315 mm |
| Gross weight | 220 kg |
Project and supply
Configured for your process
We confirm the effluent source and composition, flow rate, pH, critical contaminants, discharge point and monitoring options before the technical proposal.
- Effluent and flow-rate characterisation
- Definition of treatment stages and reagents
- Delivery across Europe, North America and South America