Intelligent monitoring and automatic operation
Wastewater treatment
Laboratory wastewater treatment system up to 200 L/day
BK-SFS200
Automatic system for treating up to 200 L of laboratory wastewater in 8 hours, combining neutralisation, oxidation, disinfection and multi-stage filtration.
Accurate dosing with level control and alarms
Ozone and UV disinfection with multi-stage filtration
Technical data
Reference configuration
The final configuration depends on daily flow, effluent composition, contaminant load, reagents and discharge requirements.
| Treated water volume | 200 L/day (8 hours) |
|---|---|
| pH measurement range | 0 to 14 |
| pH adjustment range | 6 to 9 |
| pH resolution | 0.01 pH |
| pH accuracy | ±0.02 pH |
| Treatment process | Neutralisation precipitation + combined disinfection by ozone/oxidising agent + UV sterilisation + multi-stage filtration |
| System flushing | Positive and negative flushing |
| Water inlet | Suction inlet |
| Antifreeze protection | Automatic heating below 5 °C |
| Liquid-level monitoring | Multi-channel detection, reagent-shortage alarm and automatic treatment |
| Electrical supply | AC 220 V, 50/60 Hz; AC 110 V, 50/60 Hz optional |
| Package dimensions | Machine: 1055 × 559 × 948 mm; accessories: 315 × 555 × 165 mm |
| Gross weight | 102.5 kg |
Project and supply
Configured for your process
We confirm the effluent source and composition, flow rate, pH, critical contaminants, discharge point and monitoring options before the technical proposal.
- Effluent and flow-rate characterisation
- Definition of treatment stages and reagents
- Delivery across Europe, North America and South America