Three shafts: bulk agitation and two high-shear emulsifiers
Equipment gallery
Reference image of the vessel; the agitation system is defined in the configuration.
Mixing and emulsification reactors
Triple-shaft high-shear jacketed reactor
Project-specific configuration; capacity and agitation system to be defined
Reactor for preparing mixtures and emulsions in operations that benefit from combining product circulation with localised high-shear mixing. The triple-shaft configuration brings together a bulk agitator and two high-shear emulsifiers: the agitator helps move material through the mixing zones, while the emulsifiers promote component dispersion and agglomerate reduction. The jacket allows a heat-transfer fluid to circulate for heating or cooling the contents. Product-contact materials in 304 or 316L stainless steel are selected for the product. Working volume, drives, speeds and thermal operating conditions are defined for each project, taking account of the intended mixing operation and installation.
Jacket for circulating a heating or cooling fluid
304 or 316L stainless steel selected for the product
Technical data
Reference configuration
The final configuration is selected for the intended operation, installation conditions and compatibility with existing equipment.
Specifications by model
Each column identifies a model or configuration. Shared values are marked.
| Parameter | Project configuration — 700 L nominal option |
|---|---|
| Nominal volume option | 700 L nominal option; working volume to confirm |
| Working volume | — |
| Reference agitation system | One bulk agitator and two high-shear emulsifiers |
| Available product-contact materials | 304 or 316L stainless steel, depending on product and configuration |
| Thermal control | Jacket for heat-transfer fluid circulation |
| Total installed power | — |
| Electrical supply for the configuration | — |
| Phases and frequency | — |
| Speed of each shaft | — |
| Net assembly weight | — |
| Equipment dimensions (L × W × H) | — |
| Operating temperature and pressure | — |
— To be confirmed for this configuration.
Nominal volume does not define working volume. Drives, electrical supply, speeds, mass, dimensions and thermal limits are confirmed for the selected assembly.
Project and supply
Configured for your process
Before the proposal, we confirm the application, operating parameters, interfaces and scope of supply.
- Technical selection and configuration
- Documentation and automation options
- Delivery to Europe, North America and South America