Continuous process
Industrial evaporation
Falling film evaporators from 10 to 120 L/h
Evaporation areas from 1 to 20 m²
Systems for concentrating solutions and recovering volatile material through continuous evaporation. Liquid is distributed at the top of heated tubes and runs down their walls as a thin film; solvent partly evaporates while concentrated product moves to separation and collection. The film limits liquid held in the heating zone, useful for materials sensitive to thermal exposure time. Glass allows flow observation. Suitability depends on feed, viscosity, film formation and heating, vacuum and condensation conditions.
Low residence time
Heating by steam or thermal oil
Technical data
Reference configuration
The final configuration is selected for the intended operation, installation conditions and compatibility with existing equipment.
Specifications by model
Each column identifies a model or configuration. Shared values are marked.
↔ Scroll to compare models
| Parameter | YMFFE-01 | YMFFE-5 | YMFFE-10 | YMFFE-20 |
|---|---|---|---|---|
| Indicative processing rate | 10L/h | 20L/h | 30–50L/h | 80–120L/h |
| Evaporation area | 1m² | 5m² | 10m² | 20m² |
Flow rates are indicative for the range and depend on solvent, composition, pressure, temperature and feed concentration.
General characteristics
| Indicative capacity | 10 to 120 L/h, depending on model and product |
|---|---|
| Evaporation area | 1, 5, 10 or 20 m² |
| Operation | Falling film |
| Material | Borosilicate glass |
| Project | Sized according to solvent, concentration and flow rate |
Project and supply
Configured for your process
Before the proposal, we confirm the application, operating parameters, interfaces and scope of supply.
- Technical selection and configuration
- Documentation and automation options
- Delivery to Europe, North America and South America