Short path between evaporation and condensation
Distillation and evaporation
Short-path molecular distillation systems
YMSPD-80 / 100 / 150 / 200 — areas of 0.15 / 0.25 / 0.30 / 0.35 m²
Systems for separating and purifying low-volatility or heat-sensitive components, such as fractions of oils and extracts. Product forms a film on a heated surface, and evaporating components travel a short distance to an internal condenser under high vacuum. Distillate and residue are collected separately so product distribution between fractions can be assessed. The short path and limited thermal exposure are relevant to these applications; composition, viscosity and the separation objective guide trials and configuration.
Reduced residence time
Configurable final vacuum
Technical data
Reference configuration
The final configuration is selected for the intended operation, installation conditions and compatibility with existing equipment.
Specifications by model
Each column identifies a model or configuration. Shared values are marked.
↔ Scroll to compare models
| Parameter | YMSPD-80 | YMSPD-100 | YMSPD-150 | YMSPD-200 |
|---|---|---|---|---|
| Evaporation area | 0,15 m² | 0,25 m² | 0,3 m² | 0,35 m² |
| Condensing area | 0,2 m² | 0,4 m² | 0,4 m² | 0,5 m² |
| Evaporator diameter | 80 mm | 100 mm | 150 mm | 200 mm |
| Feed volume | 1 L | 2 L | 5 L | 5 L |
| Indicative processing rate | 0,3–0,4 kg/h | 0,5–5 kg/h | 1,0–8,0 kg/h | 2,0–10,0 kg/h |
| Motor power | 140W | 250W | 250W | 250W |
| Power supply | Common to all models220 V | |||
| Maximum rotational speed | Common to all models600rpm | |||
Processing rates are indicative. Working vacuum and thermal utilities are sized for the product and the complete system.
General characteristics
| Templates | YMSPD-80, 100, 150 and 200 |
|---|---|
| Evaporation area | 0.15 to 0.35 m² |
| Indicative capacity | 0.3 to 10 kg/h, depending on model and product |
| Maximum rotational speed | 600rpm |
| Motor power | 140 W or 250 W, depending on model |
| Vacuum and temperature | Defined for the complete system and product |
Project and supply
Configured for your process
Before the proposal, we confirm the application, operating parameters, interfaces and scope of supply.
- Technical selection and configuration
- Documentation and automation options
- Delivery to Europe, North America and South America